FURNACE INSPECTION DETAILS
  1. Clean and adjust automatic controls
  2. Clean burners
  3. Adjust combustion for optimum fuel efficiency
  4. Lubricate as needed
  5. Test for combustion leaks
  6. Test safety shutoff response
  7. Check blower belt wear, tension and alignment
  8. Check flue for satisfactory operation and venting
  9. Replace standard 1″ filter
AIR CONDITIONER / HEAT PUMP INSPECTION DETAILS
  1. Clean condenser coil if necessary
  2. Check all electrical connections for tightness
  3. Adjust system for optimum efficiency
  4. Check for oil and refrigerant leaks
  5. Check safety devices to assure proper operation
  6. Check blower belt wear, tension and alignment
  7. Check expansion valve and coil temperatures
  8. Check refrigerant level
  9. Check condensate drain
  10. Lubricate as needed

HUMIDIFIER INSPECTION DETAILS
  1. Clean the drain line
  2. Replace evaporator pad*
  3. Check operation
  4. Check controls and damper for proper settings.

  • Payment for maintenance inspections per this agreement will be PREPAID in full. Additional repair charges necessary to correct defects discovered by these inspections are to be paid at the time of the repairs.
  • The service outlined In this agreement will be performed during normal hours. Repair service requested by customer will be provided during normal working hours at a 15% discount.
  • Priority Service.
  • Repair workmanship is guaranteed for 30 days from the date of the repair.
  • Repair charges necessary to correct defects that are discovered by this preventive maintenance Inspection would be the sole responsibility of the Purchaser.
  • Emergency service after hours will be charged at overtime rates.